The following examples assume that their are not any slides in position 0 and you are using two slide Projectors.

from INITIAL power on

Status: Projector 1 at slide 0 lamp on : Projector 2 at slide 0 lamp on, both shutters closed (No lamp no slide), Projector 1 active

Objective: set Xfade speed to 5 seconds (currently 0 seconds)

Buttons to press FADE, 5

Status: Projector 1 at slide 0 lamp on : Projector 2 at slide 0 lamp on, both shutters closed (No lamp no slide), Projector 1 active

Objective: Move Projector 1 to slide 1 ready to start presentation

Buttons to press PRESENT

Status: Projector 1 at slide 1 lamp off : Projector 2 at slide 0 lamp on (shutter closed), Projector 2 active

Objective: Show Projector 1 slide 1, move Projector 2 to slide 1

Buttons to press PRESENT

Status: Projector 1 at slide 1 lamp on : Projector 2 at slide 1 lamp off, Projector 1 active

Objective: X fade from Projector 1 slide 1 to Projector 2 slide 1, move Projector 1 to slide 2

Buttons to press PRESENT

Status: Projector 1 at slide 2 lamp off : Projector 2 at slide 1 lamp on , Projector 2 active

Objective: Xfade from Projector 2 slide 1 to Projector 1 slide 2, move Projector 2 to slide 2

Buttons to press PRESENT etc,,,

Status: Projector 1 at slide 2 lamp off : Projector 2 at slide 1 lamp on , Projector 2 active

Objective: remove fade speed (currently 5 sec's)

Buttons to press FADE, 0

Status: Projector 1 at slide 2 lamp off : Projector 2 at slide 1 lamp on, Projector 2 active

Objective: Move Projector 2 to slide 21

Buttons to press 21

Status: Projector 1 at slide 2 lamp off : Projector 2 at slide 21 lamp on, Projector 2 active

Objective: Move Projector 2 forward 1 slide to slide 22

Buttons to press FORWARD

Status: Projector 1 at slide 2 lamp off : Projector 2 at slide 22 lamp on, Projector 2 active

Objective: Turn off Projector 2 lamp

Buttons to press LAMP

Status: Projector 1 at slide 2 lamp off :Projector 2 at slide 22 lamp off, Projector 2 active

Objective: Turn on Projector 1 lamp

Buttons to press P1, LAMP

Status: Projector 1 at slide 2 lamp on : Projector 2 at slide 22 lamp off, Projector 1 active

Objective: set Xfade speed to 3 seconds

Buttons to press FADE, 3

Status: Projector 1 at slide 2 lamp on : Projector 2 at slide 22 lamp off, Projector 1 active

Objective: X fade from Projector 1 to Projector 2 over 3 seconds

Buttons to press Xfade

Status: Projector 1 at slide 2 lamp off :Projector 2 at slide 22 lamp on, Projector 2 active

Objective: Put Projector 1 lamp on as well as Projector 2

Buttons to press P1, LAMP

All brand names and trademarks are acknowledged to their respective owners.

Further Information and Control Description

Return to AV Presenter